Sun Remote System Control (RSC) 2.2 User's Guide tells you how to configure and use SunTM Remote System Control software. These instructions are designed for an experienced system administrator with networking knowledge.
Note -Because Sun EnterpriseTM 250 servers have different RSC communication ports and firmware, RSC running on Sun Enterprise 250 servers has slightly different features from RSC running on other supported workgroup servers. In this manual, such differences are marked with a graphic taken from the Sun Enterprise 250 server front panel, shown to the left of this note.
This book contains the following chapters and appendixes:
This document does not contain information on basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.
See one or more of the following for this information:
Shell
Prompt
C shell
machine_name%
C shell superuser
machine_name#
Bourne shell and Korn shell
$
Bourne shell and Korn shell superuser
#
Remote System Control shell
rsc>
OpenBoot PROM shell
ok
Online copies of Sun Remote System Control (RSC) 2.2 User's Guide are available in these locations after RSC installation:
A broad selection of Sun system documentation is located at:
http://www.sun.com/products-n-solutions/hardware/docs
A complete set of Solaris documentation and many other titles are located at:
http://docs.sun.com
Fatbrain.com, an Internet professional bookstore, stocks select product documentation from Sun Microsystems, Inc.
For a list of documents and how to order them, visit the Sun Documentation Center on Fatbrain.com at:
- http://www1.fatbrain.com/documentation/sun
Sun is interested in improving its documentation and welcomes your comments and suggestions. You can email your comments to Sun at:
- docfeedback@sun.com
Please include the part number (816-3314-10) of your document in the subject line of your email.